IntuPulse 350 (Hybrid Pulse MIG)
- SKU:
- HPM-Intupulse 350
- Weight:
- 250.00 LBS
- Shipping:
- Free Shipping
MSRP:
Now:
$4,950.00
Was:
— You save
Description
Battery Powered Pulse MIG Welder
- Battery Powered for ultimate portability
- 350+ amp welding output
- Weld 22 gauge to over 1"
- Proprietary DC IntuPulse™ Technology
- Steel, Aluminum, Stainless Steel and Silicon Bronze
- Automatic current monitoring to provide level welding voltage.
- Weld for hours with out being connected to power.
- Built in battery charging system included;uses 110-volt 15 amp outlet
- Weld while charging
- Compatible with all wire spool sizes
- Dual roller wire feed system
Standard Equipment
- 2-AGM Batteries
- 10 Foot 260 amp MIG Torch
- 1/0 ground cable
Optional Accessories
- Aluminium configured torch
- Dust Cover
- Gas Gauge/Regulator
- 11 lb starter spool of .035 steel wire
- Double Bottle Rack
Technical Highlights
- Square Wave Pulsed MIG
- Fan Cooled
- Made in the USA
(Fixed shipping applies to Retail purchases shipped to commercial addresses in the USA; additional costs my apply to rural, residential or export shipments)
Videos Hide Videos Show Videos
Related Products


IntuPulse 350-HD (Hybrid Pulse MIG Heavy Duty)
MSRP:
Now:
$5,950.00
Was:
Battery Powered Pulse MIG Welder-Heavy Duty
Battery Powered for ultimate portability
350+ amp welding output
Weld 22 gauge to over 1"
Proprietary...
MSRP:
Now:
$5,950.00
Was:


IntuPulse 350-Multi-Torch (Hybrid Pulse MIG Multi Torch)
MSRP:
Now:
$8,950.00
Was:
Battery Powered Pulse MIG Welder-Heavy Duty
Battery Powered for ultimate portability
350+ amp welding output
Weld 22 gauge to over 1"
Proprietary...
MSRP:
Now:
$8,950.00
Was:


Double Bottle Rack-Intupulse 350
MSRP:
Now:
$450.00
Was:
Upgrade for Intupulse 350-to add 2 gas bottle carrying capacity
The double bottle rack is standard on Intupulse 350 Multi-Torch models
MSRP:
Now:
$450.00
Was:

Intupulse; C-Type Drive Roll
MSRP:
Now:
$57.50
Was:
Replacement Drive Rolls for C type Drive
1-Pair included
MSRP:
Now:
$57.50
Was:

Intupulse-Internal Charger Package
MSRP:
Now:
$1,750.00
Was:
See Part Number SA-107 for Charger Circuit Board Only
MSRP:
Now:
$1,750.00
Was:
Customers Also Viewed


Hybrid Welding Station
MSRP:
Now:
$18,500.00
Was:
Includes Shipping. (Commercial, Non-Rural addresses only)
Squeeze Type Resistance Spot Welder (STRSW) with single sided spot welding capabilities.
This welder...
MSRP:
Now:
$18,500.00
Was:


IntuPulse 350-HD (Hybrid Pulse MIG Heavy Duty)
MSRP:
Now:
$5,950.00
Was:
Battery Powered Pulse MIG Welder-Heavy Duty
Battery Powered for ultimate portability
350+ amp welding output
Weld 22 gauge to over 1"
Proprietary...
MSRP:
Now:
$5,950.00
Was:


IntuPulse 350-Multi-Torch (Hybrid Pulse MIG Multi Torch)
MSRP:
Now:
$8,950.00
Was:
Battery Powered Pulse MIG Welder-Heavy Duty
Battery Powered for ultimate portability
350+ amp welding output
Weld 22 gauge to over 1"
Proprietary...
MSRP:
Now:
$8,950.00
Was:

Push Button- Control Handle
MSRP:
Now:
$18.00
Was:
Activation button switch found for Panel Beater control handle. Includes shrink wrap. Control cord (PB-248) sold separately.
MSRP:
Now:
$18.00
Was:


Tool Tray Package
MSRP:
Now:
$255.00
Was:
Tool Tray Package Includes:
Tool Tray
6 Finger Slide Hammer Claw
Slide Hammer
Wave Wire Tool
1lb AIM Wire
Package Valued at $397.50 if purchased separately
MSRP:
Now:
$255.00
Was:

Copper Shrink Tool
MSRP:
Now:
$45.00
Was:
Copper tip accessory for control handle.
Used to tighten metal and reduce bulges.
MSRP:
Now:
$45.00
Was:

Wave Wire Tool
MSRP:
Now:
$40.00
Was:
Tool used to attach AIM Wave Wire (SA-133)
Used with Electrode Holder (PB-201)
MSRP:
Now:
$40.00
Was:


Control Handle Package
MSRP:
Now:
$185.00
Was:
Package includes:
Control Handle
5-Pack of Dent Pulling Electrodes
Electrode Holder
Shrink Tip
Package valued at $265.00
Savings of $90.00
MSRP:
Now:
$185.00
Was:

1 Lb of Wave Wire
MSRP:
Now:
$42.50
Was:
1 Pound of AIM Wave Wire used for pulling creases and dents.
Specify diameter Thin (.063) or Thick (.093) when ordering.
MSRP:
Now:
$42.50
Was: