Loading... Please wait...
Sort by:

1015DBL Parts

  • Pages:
  • 1
  • 2
  • 1 Lb of Wave Wire
    $42.50 Choose Options 1 Lb of Wave Wire
    1 Pound of AIM Wave Wire used for pulling creases and dents.   Specify diameter Thin (.063) or Thick (.093) when ordering...

  • 1/2 lb Wave Wire
    $28.00 Choose Options 1/2 lb Wave Wire
    1/2 lb of AIM Wave Wire used for pulling creases and dents.   Specify diameter Thin (.063) or Thick (.093) when ordering...

  • 16/2 Control Cord (cord only) 10ft
    $26.00 16/2 Control Cord (cord only) 10ft
    Control cable used to connect the  Control Handle push button (PB-226) to the Panel Beater.

  • 6 Finger Slide Hammer Claw
    $85.00 6 Finger Slide Hammer Claw
    Extra Strength 6 Finger Claw used with PB-244 AIM Slide Hammer

  • $95.00 6- Finger Claw-Handle Style
    Use with AIM Wave Wire SA-133

  • AIM Slide Hammer for Quick Spot Handle
    $225.00 AIM Slide Hammer for Quick Spot Handle
    Used to pull difficult dents.  Screws directly into your existing SA-109 (Quick Spot Handle) and uses the same dent pulling electrodes. Can only be used with models 1015, 1050 and 1250...

  • AIM Slide Hammer with 6-Finger Claw
    $180.00 AIM Slide Hammer with 6-Finger Claw
    Includes: Slide Hammer with 6 Finger Claw attachment  

  • AIM Wave Wire Package
    $125.00 Choose Options AIM Wave Wire Package
    Package Includes: 6 Finger Slide Hammer Claw AIM Wave Wire Tool 1 Pound of AIM...

  • Cable Assembly with LED Lights and Male Plug
    $228.00 Cable Assembly with LED Lights and Male Plug
    Cable assemble comes with LED lights and Male plug

  • Caster Wheel (2 Each)
    $29.50 Caster Wheel (2 Each)
    Front Wheels found on Panel Beater. Includes two wheels.

  • Dent Pulling Electrodes (Pack of 5)
    $25.00 Dent Pulling Electrodes (Pack of 5)
    Includes 5 Dent Pulling Electrodes

  • Domestic Charger
    $360.00 Choose Options Domestic Charger
    Charges a 12V Battery using an XLR connector. Other options available for  International or older models. Call for details...

  • Electrode Holder - Quick Spot Handle
    $97.50 Electrode Holder - Quick Spot Handle
    Brass Electrode Holder for the Quick Spot Single Sided Gun 

  • Female Electrical Coupler
    $27.50 Choose Options Female Electrical Coupler
    Female XLR electrical connector.

  • Foam Grip-Control Handle/Puller Bar
    $5.50 Foam Grip-Control Handle/Puller Bar
    Sculpted black foam grip for Panel Beater control handle and/or puller bar.

  • Light Cable Assembly with Female Plug
    $45.00 Light Cable Assembly with Female Plug
    Light cable that connects the charge indicator lights to charger.

  • Magnetic AIM Wave Wire Holder
    $35.00 Magnetic AIM Wave Wire Holder
    Holds AIM Wave Wire in place while attaching wire to panel with Wave Wire Tool (SA-140)

  • Male Electrical Coupler
    $38.35 Choose Options Male Electrical Coupler
    Male XLR electrical connector.

  • On/Off Lighted Rocker Switch
    $17.00 On/Off Lighted Rocker Switch
    Panel Beater On/Off Rocker Switch

  • Panel Beater Power Cord
    $18.00 Panel Beater Power Cord
    Includes plug

  • Quick Spot Handle
    $400.00 Quick Spot Handle
    Single-sided spot welding control gun.   Includes: - Electrode Holder - Switch - 18 inch lead for attachment to HWS - 18 inch control cable with plug to connect with HWS...

  • Quick Spot Single Sided Welding Electrode
    $60.50 Quick Spot Single Sided Welding Electrode
    Copper electrode for single side spot welding. Attaches to SA-109(Quick Spot Handle) Uses Bullet Cap (1 each included) See Part number SA-275 for replacement...

  • Rear Wheel 8"
    $42.50 Rear Wheel 8"
    Panel Beater Wheels. Includes two wheels and mounting caps.

  • Set of Weld Studs/Set of 6 Tools
    $525.00 $415.00 Set of Weld Studs/Set of 6 Tools
    Includes: (50) 4mm Studs (50) 6mm Studs (50) 8mm Studs (50) 4mm Nuts (50) 6mm Nuts (50) 8mm Nuts 4mm Stud Tool 6mm Stud Tool 8mm Stud Tool 4mm Nut Tool 6mm Nut Tool 8mm Nut...


  • Pages:
  • 1
  • 2